Products
![MOTIP UBC Bottom rust spray - black 500ml MOTIP UBC Bottom rust spray - black 500ml](thumbmaker.php?pic=1269.jpg&w=229&k=2&ro=1)
MOTIP UBC Bottom rust spray - black 500ml
DDL
High quality spray preservative for treating the underside and visible parts of motor vehicles.
Product characteristics.
Re-spray with all painted and varnished surfaces remains flexible.
Very good tack.
Weather resistant.
Resistant to weak acids and bases.
Excellent corrosion prevention.
Sound absorbing.
High solids content.
Description.
Physical and chemical properties.
Contents: 500 ml.
VOC content: about 63% by weight.
Dust dry: After about 30 minutes.
No drain: after about 60 minutes.
Re-spray: after 2 hours.
Usage:
Read the instructions on the package carefully before use and proceed accordingly.
Pre-treatment process:
Remove loose old varnish and rust and sand the surface.
Treatment:
The surface must be clean, dry and free of grease. The aerosol must be at room temperature. The best treatment temperature is 15 to 25 ° C. Shake the aerosol for 2 minutes and spray the sample before use. The distance to the surface to be treated is about 25 to 30 centimeters.
Apply the stone crush spray in several layers. After drying without sanding, spray again with all painted and varnished surfaces.
Clean the valve after use (turn the spray upside down and press the nozzle for about 5 seconds).
The drying time depends on the ambient temperature, humidity and the thickness of the applied varnish. The Netherlands.