Products
POWER MAXX Two-component radiator oil cleaner, 300ml
Likvidē ekspluat. rezultātā radušās nogulsnes dzesēš. sist.,ko izraisīja noplūdes caur blīvēm,novērš kaļķa nogulsnes, sargā no rūsas, attīra vārstus, termostatus, ūdens sūkņus.Uzlabojas dzesēšanas. sist. 300 ml uz 8L, iedarbojas 15 min.
The Radiator Oil Cleaner breaks down oily deposits throughout the cooling system caused by a broken / burnt head seal or leaks. Other contaminants in the cooling system, such as sludge or lime, are dissolved and removed. Using high-quality lubricants, all metal and rubber parts are protected during the cleaning process. Valves, thermostats and water pumps work smoothly and safely again. Increases operational safety and extends the service life of the cooling system.
Application:
Cooling system cleaner for all closed water cooling systems, as well as suitable for heat exchangers. Miscible with all available coolants.
Use of:
Shake the product well before use! Add the contents of both vials (K1 and K2) to the cooling system. Open the thermostat. Run the engine for about 15 minutes. Then run the engine at medium load to achieve the optimum operating temperature. Then drain the coolant. Tanks that do not flow through the cooling circuit - wash by hand. Then rinse the cooling system thoroughly with clean water. Replace the coolant according to the manufacturer's instructions.
Consumption:
K1 + K2 is enough to clean cooling systems with a volume of 5-10 L.
