Products
POWER MAXX DPF Catalyst cleaner, 400ml
Izšķīdina un noņem piesārņojuma, sodrēju atliekas no cieto daļiņu filtra un katalizatora, nav nepieciešama demontāža. Novērš darbības samazināšanos vai traucējumus, ko izraisa piesārņots daļiņu filtrs, katalizatori. Der EGR vārsta tīr. 40ml 1 reizei
Product description:
DPF & Catalyst Cleaner - Effective cleaning of DPF filters and catalysts without removal. Dissolves and removes all typical DPF filter and catalyst contaminants. Prevents power losses and emergency modes associated with DPF filter and catalyst contamination. Restores engine power and improves car dynamics.
* Refokes the catalyst and promotes much more efficient soot filter regeneration.
* Does not require DPF filter / catalyst disassembly
* Evaporates without residue
* Can be used for EGR cleaning
Application:
Remove the temperature, pressure sensor or access opening to the DPF / catalyst and insert the probe through the opening. Spray the cleaner with the probe inserted in the particulate filter / catalyst at 5 second intervals until the DPF / catalyst is properly filled with foam. After application, close the opening. Once the cleaner is applied, the sediment is released and spread. Dirt burns during normal engine operation. Restart the recovery process through a workshop tester. Finally, remove the erroneous memory entry or delete existing errors. Then carry out a test drive consisting of about 20 minutes.
* The product can be used for all closed type soot filters. In addition, the engine oil level must be checked before use. If diesel fuel gets into the engine oil, it must be replaced.
Use of:
At the end of the treatment, run a forced regeneration of the DPF filter with the help of a diagnostic tester. Then read and clear the error codes. Then take a 20 minute drive. the product can be used for all closed type soot filters. In addition, the engine oil level must be checked before use. in the event of diesel entering the engine oil, it must be replaced.
* To optimize the regeneration of diesel engines, we recommend adding DPF Power Clean (33450) to the fuel tank after a test drive. For petrol engines we recommend OXICAT (33230)
Consumption:
The contents of the cylinder are intended for use with the DPF filter / catalyst 1
Exposure time:
About 15 minutes.
